 |
DWR, developed to suit industrial application, is a semi-automatic dispenser for self-adhesive labels fed in rolls. Fully made of steel, it is easy to operate, is flexible and suitable for any type of label.
DWR is available in 2 widths: - up to 100 mm - up to 200 mm.
The roll holder can be adapted to any core type and can accept rolls up to 300 mm diameter, thus offering long operation autonomy.
The labels are read by two self-learning sensor microprocessor controlled. They can automatically identify the difference in transparency existing between the label and the paper support, hence presenting the label on the peeler bar almost fully peeled off. After the removal of a label from the paper support, the next label will stick out automatically. Furthermore, the control card to stop the motor rotation when the roll is over or in case of paper tear, and afterwards it will give out an acoustic signal. An electromechanical detection device for transparent labels and a pre-selection counter are also available.
The battery operated version makes it possible to work for about 4 hours with no main power. Supply voltage 230 V or 115 V on request. The battery operated dispenser does not require a separate power supply unit since the battery charger is alongside the control card.
| Feature |
DWR100 |
DRW200 |
| Label width |
140mm |
230mm |
| Label length |
0-25 m/m |
0-25 m/m |
| Speed |
10-15 m/m |
10-15 m/m |
| Roll diameter |
300mm |
300mm |
| Core diameter |
38-110 mm |
38-110 mm |
| Supply voltage |
230Vac - 50Hz |
230Vac - 50Hz |
| Power consumption |
30W |
30W |
| Overall dimensions |
330x410x370 (H) |
430x410x370 (H) |
| Weight |
9.7 Kg |
11 Kg |
No files found
No files found
|
|
